Thursday, December 21, 2017

Capsule Steam Traps

cutaway view capsule steam trap
Capsule type steam trap, cutaway view
Image courtesy Tunstall Corporation
Steam traps are an important part of a closed steam system, directing condensate on a path back to the boiler for reuse and venting non-condensing gases from the system. Of the several different types of steam traps utilized commercially, the thermostatic steam trap is but one. Thermostatic traps are often applied when the application can benefit from a utilization of some of the heat remaining in the condensate. This trap design will hold the condensate in place until it cools sufficiently below the saturation temperature of the steam.

Capsules utilized in thermostatic steam traps contain the controlling elements of the device. The parts are somewhat subject to wear through their movement, but more so from the corrosive effects of system fluid, impurities, and mechanical shock from water hammer. Tunstall Corporation specializes in the manufacture of replacement capsules for thermostatic steam traps that provide better service and extended warranty duration. Their sealed units are fabricated of stainless steel and welded to seal out deterioration due to exposure to steam and condensate. Drop in replacement capsules are available for conceivably every trap manufactured in the previous few decades.

Share your steam system requirements and challenges with application specialists, leveraging your own knowledge and experience with their product application expertise to develop an effective solution.